VHF / AIS / ANTENNAS

Simrad RS20S Class D DSC VHF Radio: Entry level VHF radio with NMEA2000 connectivity for GPS position, backlight control and night mode grouping with Simrad MFD’s. Compliant with 2018 EU regulations.

NAIS-500 class B AIS with GPS-500 GPS antenna. Broadcast your location to anyone nearby with an AIS Receiver. A low cost safety system for recreational vessels and smaller professional vessels in near coastal waters. Reports your position and vessel size and heading to nearby vessels, avoiding dangerous situations.

GPS-500: GPS antenna for NAIS-500 AIS transceiver. 10 m (33 ft) cable with SMA connector

Lihtne paigaldada, 2 värvi valikut, pööratud LCD öö reziim.

V5035 Class A AIS System - IMO Compliant AIS system for SOLAS vessels. NMEA2000 Connection for integration with P3007 GPS Systems and with Simrad MFD systems. For an auxillary larger AIS display, use P3007 NAV Display.

B&G V20S fixed mount class D DSC VHF radio: Entry level VHF radio with NMEA2000 connectivity for GPS position, backlight control and night mode grouping with B&G MFD’s. Built in GPS. Conforms to new 2018 EU Standards.

NAIS-500 Class B AIS including NSPL500 VHF/AIS Antenna splitter and GPS500 antenna, 1.8 m (6ft) Micro-C cable and T connector. Broadcast your location to anyone nearby with an AIS Receiver. A low cost safety system for recreational vessels and smaller professional vessels in near coastal waters. Reports your position and vessel size and heading to nearby vessels, avoiding dangerous situations.

NSPL-500 AIS/VHF antenna splitter - Enables use of one VHF antenna on the vessel for both VHF and AIS. Note - When AIS transmits, VHF RX TX is haulted for the AIS TX time.

V5035 AIS U KRONSTEIN PAIGALDUSKOMPLEKTIGA

V0535 AIS GPS ANT W 10M kaabel

V5035 AIS 3-PIN TOITEKAABEL

V5035 AIS 37-PIN EXT KAABEL

V5035 AIS harukarp

V5035 AIS juhtpistik

Many AIS splitters introduce significant signal loss, some say no loss but this unique Vesper Marine splitter is the only one that provides signal gain - improving AIS reception and increasing range. This is because the Vesper Marine splitter has a built-in low noise amplifier. This is especially important to increase the receive range from the increasing number of low power AIS SART and MOB devices. In addition to the amplification provided by this splitter, when used with your existing antenna you can optimize the range of your AIS transponder because the antenna is also mounted as high as possible. Designed to work with all Vesper Marine AIS transponders including the popular WatchMate XB-6000 and WatchMate XB-8000. In addition it has a unique on-screen VHF-in-use indicator when used with the WatchMate 850 and WatchMate Vision AIS transponders. Increases the performance of other manufacturer´s AIS receivers and transponders too! To simplify installation you can share an existing VHF antenna by using this splitter. The unit removes the need for a separate VHF antenna for an AIS receiver or transponder and allows a single antenna to be shared with a VHF radio. This is an excellent solution when it is difficult to install an additional antenna or you wish to share an existing VHF antenna and maximize your AIS range. This Vesper Marine splitter is specifically designed for use with both AIS receivers and transponders. Our splitter includes two 2m (6.5ft) long patch cables to go between the splitter, AIS and your VHF radio. This provides everything needed for most installations. However, if you require a longer cable be sure to choose high quality marine grade 50 ohm cable with standard PL259 plugs to go between the splitter and your AIS transponder or VHF. Maximum Current: 270 mA; Maximum VHF power: 25W; Maximum AIS power: 12.5W; Compatibility: Fully compatible with all Vesper Marine AIS transponders and receivers. Also compatible with other manufacturer´s AIS receiv

This antenna is specially designed by Vesper Marine to be used with our Antenna Splitter. Up until now you´ve had to choose an AIS-tuned antenna that is optimized for the AIS frequencies but has lower performance for your VHF radio. Or you could choose an antenna that is designed for VHF radio communications but isn´t optimal for AIS. Either of those works but we´ve got a better solution. We´ve created an antenna that solves this dilemma. It has two key features that combine to make it ideal for use with our antenna splitter: Wide bandwidth of 6 MHz means it will cover 3 MHz above and below the center point; 159 MHz center frequency gives excellent performance for VHF radio (156 Mhz) and AIS (162 MHz). The result is an antenna with superior performance over other designs. It has less than 1.5:1 VSWR at 156 MHz all the way up to 162 MHz. With other VHF or AIS antennas you´ll only get low VSWR at one end of the frequency band but not both. We´ve put all of this into the same physical package as our most popular antenna. It´s perfect for installations where the lowest possible windage is a requirement. A detachable cable makes installation and maintenance easier and allows for any length cable to be used. It easily mounts on a mast but is also suitаble for mounting most anywhere with it´s included L-bracket. Example mounting locations from our customers are along side solar panels, bimini sides, on an arch, above a radar, or along the edge of a cabin top. The L-bracket can be removed allowing for even greater mounting flexibility. Specially designed 1.0m stainless steel antenna; Easily replaceable stainless steel whip if it gets lost or damaged; Optimized for sharing between VHF radio and AIS transponder; Includes SO239 socket & mounting bracket; Perfect for masthead or installations where the L-bracket suits; Easily adapted to most any installation configuration; Detachable cable allows for any length to be used.

The Cortex H1 Tethered Handset is the voice and calling interface used for VHF and DSC calls. The handset’s touchscreen display is the primary interface together with dedicated buttons and the Click-Wheel for swift navigation, ease of operation and single-handed use. The touchscreen is purpose-built for the harsh marine environment and is designed and manufactured for use in wet conditions and with gloves. The handset provides a screen to set up and manage the Cortex M1 hub, view AIS target data and vessel instrumentation, manage and monitor alarms and configure the remote vessel monitoring. Upgrade your Cortex M1 SOTDMA smartAIS or add additional handsets for access to key functions in more places on board. Have situational awareness and VHF communication at your fingertips, no matter where you are on your boat. The Cortex H1 comes bundled in the Cortex V1 VHF. Add additional H1 handsets for additional stations. Includes an H1 Bulkhead Bonnector and an H1 Cradle. Operating Temperature: -25°C to +55°C (-13°F to 131°F); Audio: 3W Class D amplifier, THD < 5% @ 85dBA; Screen: LCD TFT Si, 640 x 800, 24bit Colour; Touch: Capacitive, optically bonded to LCD. Glove and salt water operable; Backlight: 600 cd/m2. Ambient light sensor for auto dimming.

The Cortex H1P Portable Handset is the voice and calling interface for VHF, DSC calls and to view AIS targets. The handset’s touchscreen display is the primary interface together with dedicated buttons and the Click-Wheel for swift navigation, ease of operation and single-handed use. The touchscreen is purpose-built for the harsh marine environment and is designed and manufactured for use in wet conditions and with gloves. The handset provides a screen to set up and manage the Cortex M1 hub, view AIS target data and vessel instrumentation, manage and monitor alarms and configure the remote vessel monitoring. Upgrade your Cortex M1 SOTDMA smartAIS or add additional handsets for access to key functions in more places on board. Have situational awareness and VHF communication at your fingertips, no matter where you are on your boat. Includes an H1P Charging Cradle and non-powered H1 cradle. Operating temperature: -25°C to +55°C (-13°F to 131°F); Audio: 3W Class D amplifier, THD < 5% @ 85dBA; Screen: LCD TFT Si, 640 x 800, 24bit Colour; Touch: Capacitive, optically bonded to LCD. Glove and salt water operable; Backlight: 600 cd/m2. Ambient li; Screen: LCD TFT Si, 640 x 800, 24bit Colour; Touch: Capacitive, optically bonded to LCD. Glove and salt water operable; Backlight: 600 cd/m2. Ambient light sensor for auto dimming.

Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone. Operating Temperature: -25°C to +55°C (-13°F to 131°F); Supported Protocols: AIS Class B SO-TDMA, VHF Voice, Class D DSC, ATIS (user configurable, EU region), NOAA Weather (US region); Transmitter Frequency Error: Less than 300Hz; Antenna Connector: SO239; Splitter: Max input power 25W, Insertion Loss RX 0dB, TX < 1dB; Splitter Connector: BNC (2W).

Uue põlvkonna multifunktsionaalne VHF-AIS seade enneolematu funktsionaalsusega

▪️ Juhtmega ja juhtmeta puutetundliku ekraaniga käsiseade, mis on kasutatav ka kinnaste ja märgade kätega.
▪️ Integreeritud splitteriga SOTDMA B-klassi AIS transponder 5w väljundvõimsusega
▪️ Kogu funktsionaalsus kasutatav Android või iOS nutiseadmes (v.a. VHF kõned)
▪️ Instrumentide ja erinevate sensorite ning alarmide monitooring (navi info, pilsipump, kaldavool, akupinge)
▪️ Süsteemiga liidetud seadmete juhtimise võimalus üle äpi (tuled, külmik, kliima…)
▪️ WiFi ja tootjapoolne andmeside ühendus üle Euroopa, mis võimaldab olla laevaga ühenduses ja jälgida ning juhtida eemalt kõiki võrku liidetud pardasüsteeme.
▪️ Mitmekülgne ja nutikas ankrualarm
▪️ Sisemised sensorid – kompass, GPS, baromeeter
▪️ Mugav ja intuitiivne kasutajaliides

External Cellular Antenna connects using the Cellular Antenna Patch Cable (included) to the Cortex Hub. The External Cellular Antenna offers increased range over the internal antenna. Included Cellular Patch Cable is 5m (16ft) with Male SMA to Antenna and Female SMA to the Cortex Hub. Deck mount flush and Vertical surface mount included.

External GPS Antenna for Cortex M1 with 8" (200mm) cable. This multi-constellation GNSS Antenna is designed as an external antenna for the Cortex Hub, WatchMate Vision or XB series of AIS transponders . It is IP67 and UV stable for use in a harsh marine environment. GNSS (Global Navigation Satellite System) includes GPS, GLONASS, Bei Dou and Gallileo positioning networks.

This antenna is designed for the WatchMate Vision AIS Transponder. It may also be used as a replacement antenna for an XB-8000 or XB-6000 AIS Transponder. It combines a high performance GPS antenna and a low noise amplifier into a state-of-the-art compact and fully waterproof enclosure. This innovative antenna design has two mounting options; Pole Mount or Base Mount. As well as being easy to mount it comes with a 10m (32.8 feet) cable that has a small diameter connector making it easier to route the cable through smaller holes. Fully weather proof; Ultra-high sensitivity; Compact construction; Excellent temperature stability; Small connector at one end of the cable to facilitate installation; Two mounting configurations (pole or base); Compatibility: For use only with a WatchMate Vision or as a replacement antenna for an XB-8000 or XB-6000; Construction: Compact waterproof (IPx7) housing; Dimensions: 90mm (3 1/2") diameter x 118mm (4 2/3") high when used with base mount (as shown in the photo at the top of this page); Mounting: Pole (standard 1" threaded mast) and Base included; Cable: 10 metre (32.8 ft) RG58 with SMA that connects directly to WatchMate Vision.

The Cortex External Speaker is designed for the marine environment with an IP66 ingress protection the speaker is suitable for mounting almost anywhere on board. Compact in size, the speaker features a durable and UV stable polymer housing. Rated at 70W max power output (35W RMS) with a frequency response of 120Hz-20,000Hz to deliver a full clear sound for Cortex VHF voice and unique annunciated alarms. Surface Mount through using a 74.5mm (2 15/16”) diameter hole and requiring a minimum mounting depth of 56mm (2 1/4”). Mounted Outer Diameter: 93.5mm; Frequency Range: 120hz~20khz; Impedance: 4ohm; Watts: 70 Watt; Magnet Ferrite: 4oz; Woofer Material Polypropylene Cone; IP Rating: IP66; UV Stable: Yes; Pre-wired with 6.5ft / 1.98m of cable.

H1 Handset Bulkhead Connector includes a mounting base, cover, waterproof cap and power cable. Connect the bulkhead connector to 12V or 24V DC.

H1P Handset Charging Cradle securely holds a Cortex H1P Portable Handset. The cradle is pre-wired for connection to 12V or 24V DC. Small SMA connector for easy installation; Pre-wired 200mm (8”) RF cable for easy servicing; Two mounting confi gurations (deck or under deck); UV stable housing provides good color stability; UV stable plastic with a zinc plated alloy base; Dimensions: 60mm x 19mm; Loom: 200mm; Color: White; Mounting: Bulkhead, pole, deck and underdeck mounting.

Simrad HS100 wired handset and speaker for HS100/HS100-B VHF radios

HS40 - Wireless handset for the RS40 and RS100 VHF radios. HS40 duplicates the radios display and controls, enabling remote control access to all key functions.

New front mountable design for easy installation
New Industrial Design to align with style of Lowrance MFD’s
Seamless integration with a wider B&G system through NMEA 2000 and 0183
Built in AIS Receiver
Large screen with intuitive user interface

Railblaza Cradle Adapter fits to the rear of either the H1 Cradle or the H1P Charging Cradle allowing a Railblaza StarPort attachment to be connected.

Simrad RS100 Blackbox VHF radio. Includes NRS-1 VHF Blackbox module and one HS100 wired handset and one SP100 speaker. Add up to 4 total wired handsets, 4 speakers and 4 wireless HS40 handsets.

Simrad RS100-B Blackbox VHF Radio. Includes NRS-2 VHF Blackbox module with Class B AIS built in, and one HS100 wired handset and one SP100 speaker. Add up to 4 total wired handsets, 4 speakers and 4 wireless HS40 handsets.

Simrad RS40-B fixed-mount DSC VHF Radio with integrated Class B AIS transmitter and receiver, GPS, and wireless handset support.

Simrad RS40-B and GPS-500 KIT: Fixed-mount DSC VHF Radio with integrated AIS transmitter and receiver, wireless handset support. Includes GPS-500 GPS antenna for situations where the internal GPS don´t get reception.

Mount your handset anywhere on the boat with the non-powered handset cradle. The cradle has a two piece design hiding the mounting hardware behind the snap cover leaving you with a clean sleek design on the helm or bulkhead. The non-powered handset cradle can be used with either the H1(tethered) or H1P (portable) handsets.

B&G V60-B AND GPS-500 KIT: Fixed-mount DSC VHF Radio with integrated AIS transmitter and receiver, wireless handset support. Includes GPS-500 GPS antenna

B&G V60-B: Fixed-mount DSC VHF Radio with integrated AIS transmitter and receiver, wireless handset support.

B&G V60 Replaces the current V50 mid level VHF, updated to comply with EN 301 025 (v2.2.1)
New front mountable design for easy installation
Low profile design to align with style of B&G MFD’s
Seamless integration with a wider B&G system through NMEA 2000 and 0183
Built in AIS Receiver
Large screen with intuitive user interface
Optional wireless handsеts with inductive charging

B&G V100-B VHF radio & AIS system. Includes NRS-2, H100 handset, SP100 speaker and GPS-500 antenna