Navico 1720 VHF antena, 1,1 m (3 ft) nerūsējošā tērauda masta topa antena ar kronšteinu @ 3dB
- Display - 3.5-inch Colour TFT LCD | 320 x 240 | Backlighting
- IMO compliant class-A AIS system
- GPS Antenna Type - TNC Female
- 50 GPS Receiver Channels
- Waterproof Rating - IPX2
- Dimensions - 205 mm (8.07 in) x 85 mm (3.35 in) x 173 mm (6.81 in) without connectors | W x H x D
- Weight - 1.16 kg (2.56 lb)
- Power Consumption - < 9 W average @ 12 VDC, < 65 W peak power @ 12 VDC
- Power Supply (Supply Voltage) - 12 / 24 V DC
This antenna is specially designed by Vesper Marine to be used with our Antenna Splitter. Up until now you´ve had to choose an AIS-tuned antenna that is optimized for the AIS frequencies but has lower performance for your VHF radio. Or you could choose an antenna that is designed for VHF radio communications but isn´t optimal for AIS. Either of those works but we´ve got a better solution. We´ve created an antenna that solves this dilemma. It has two key features that combine to make it ideal for use with our antenna splitter: Wide bandwidth of 6 MHz means it will cover 3 MHz above and below the center point; 159 MHz center frequency gives excellent performance for VHF radio (156 Mhz) and AIS (162 MHz). The result is an antenna with superior performance over other designs. It has less than 1.5:1 VSWR at 156 MHz all the way up to 162 MHz. With other VHF or AIS antennas you´ll only get low VSWR at one end of the frequency band but not both. We´ve put all of this into the same physical package as our most popular antenna. It´s perfect for installations where the lowest possible windage is a requirement. A detachable cable makes installation and maintenance easier and allows for any length cable to be used. It easily mounts on a mast but is also suitаble for mounting most anywhere with it´s included L-bracket. Example mounting locations from our customers are along side solar panels, bimini sides, on an arch, above a radar, or along the edge of a cabin top. The L-bracket can be removed allowing for even greater mounting flexibility. Specially designed 1.0m stainless steel antenna; Easily replaceable stainless steel whip if it gets lost or damaged; Optimized for sharing between VHF radio and AIS transponder; Includes SO239 socket & mounting bracket; Perfect for masthead or installations where the L-bracket suits; Easily adapted to most any installation configuration; Detachable cable allows for any length to be used.
Powered by smartAIS technology, Vision2 has safety features that can save lives. Get proactive alerts when you have potential collision situations, if your anchor drags or if there´s a man overboard situation. With its intuitive and easy to use touchscreen, scroll through the menu, zoom in and out, see vessel details and navigation data, change alarm settings and more with the most gentle of touches. Remote control your transponder from anywhere on board with your smartphone, tаblet or smartwatch using highispeed WiFi. The Vision2 enables up to eight devices connected simultaneously for greater flexibility. The Vision2 has a stylish black bezel front panel with glossy black side panels, designed to complement every helm or Nav station. Operating Temperature: -25°C to +55°C (-13°F to 131°F); Coastal outlines: World-wide included; Nr of receivers: 2 AIS, 1 DSC (timeshared); Receive sensitivity: -113 dBm (<20% PER); Number of transmitters: 1 AIS; Transmit power output: 33 dBm (2W); GPS: 50 channel with internal antenna. Supports WAAS and EGNOS. Optional external antenna is required if Vision2 is mounted without a clear view of the sky; GPS navigation rate: 50 channel with internal antenna. Supports WAAS and EGNOS. Optional external antenna is required if Vision2 is mounted without a clear view of the sky; GPS sensitivity: tracking & navigation, -142dBm acquisition (cold start); GPS accuracy: Position 2.5m CEP, SBAS 2.0m CEP; VHF antenna required: 50 ohm, 156-162MHz, max 2:1 VSWR, PL-259 connector; Serial data: 1 fully isolated USB port (mini), 1 isolated NMEA 0183 input (RS422 4800/38400 baud) 1 NMEA 0183 output (RS422 4800/38400 baud); Connectivity: NMEA 2000, NMEA 0183, USB, Wireless 802.11 b/g/n, All input NMEA 0183 sentences are repeated to the NMEA 0183 output, USB and WiFi. Ѕelected NMEA 2000 PGN´s (heading, wind, depth, speed, temperature, and log) are translated to NMEA 0183 sentences and repeated to the NMEA 0183 output, USB and WiFi. This allows a wide varie
