AUTOPILOTS
Includes Precision-9 Heading Sensor, NAC-1 Autopilot Computer, PUMP-1 Hydraulic Pump – 0.8L reversible hydraulic pump, Standby-Auto button and Micro-C network components.
NAC-2 Autopilot Core Pack: Comprising of the low-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit Ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10 meters (33 feet) in length.
NAC-2 VRF Core Pack: Comprising of the low-current NAC-2 autopilot computer and Precision-9 compass.
NAC-3 Autopilot Core Pack: Comprising of the high-current NAC-3 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit.
NAC-3 VRF Core Pack: Comprising of the high-current NAC-3 autopilot computer and Precision-9 compass.
The low-current NAC-2 autopilot computer is ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10 metres (33 feet) in length. Also provides solenoid output.
The high-current NAC-3 autopilot computer is designed for vessels over 10 metres (33 feet) in length, with the ability to run heavy-duty hydraulic drive pumps & linear rams, and also provides solenoid output.
The OP12 wired remote seamlessly integrates with Simrad autopilot systems to provide intuitive mode control, course adjustments, and power steering. Designed to complement the low-profile design of Simrad glass bridge instruments and displays, this remote can be combined with the IS42 Colour Instrument Display to create a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.
This complete autopilot pack includes everything you need to upgrade your boat with a Simrad Continuum autopilot system. Set your heading and access advanced pilot modes with the intuitive AP44 Autopilot Controller, featuring a 4.1-inch full colour display and rotary control dial. Designed for hydraulic-steered outboard and sterndrive vessels up to 15 metres (50 feet) in length, this high capacity pack also includes an RPU-160 hydraulic steering pump, NAC-3 autopilot computer, Precision-9 solid-state compass, plus all necessary NMEA 2000® cables and connectors.
Key Features
- Everything you need to build a Simrad autopilot system
- Ideal for outboard and I/O boats up to 15 metres (50 feet)
- Easy setup with automatic tuning and compass calibration
- Virtual Rudder Feedback eliminates the need to install a mechanical rudder feedback unit
- Includes the AP44 autopilot controller with optically bonded 4.1-inch colour display and intuitive controls
- Automated turn patterns for fuel-efficient, hands-free manoeuvres
- No Drift steering holds your course against wind and tide (with optional GPS receiver)
- Depth contour tracking makes it easy to fish ledges and drop-offs (with optional depth transducer)
- Includes the RPU-160 reversible hydraulic pump (for cylinder displacement of 160-550 cm3)
- Includes the high-current NAC-3 autopilot computer
- Includes the Precision-9 solid-state compass for accurate heading data that’s automatically fine-tuned as you travel
- Includes all required NMEA 2000® network connectors and cables
Appropriate for Lowrance (NAC-1), Simrad (AC12, AC42, AC70, AP60/70/80) and B&G (Triton, H5000) autopilots.
TP sari pakub usaldusväärset juhtimist roolipinniga paatidele pikkusega kuni 32 jalga. Madal energiakasutus ja täpne juhtimisvõimekus koos minimaalse müraga, aitavad sul nautida purjetamist veelgi rohkem.
TP22 on usaldusväärne autopiloot roolipinniga paatidele pikkusega kuni 32 jalga. Madal energiakasutus ja täpne juhtimisvõimekus koos minimaalse müraga, aitavad sul nautida purjetamist veelgi rohkem.
TP32 on usaldusväärne autopiloot roolipinniga paatidele pikkusega kuni 37 jalga. Madal energiakasutus ja täpne juhtimisvõimekus koos minimaalse müraga, aitavad sul nautida purjetamist veelgi rohkem.
The AP48 Autopilot Controller is a premium dedicated control head for Continuum autopilot systems, enhanced with modern glass helm styling. Engineered for responsiveness and ease of use in all conditions, the AP48 pairs a large aluminium rotary control dial with dedicated ‘dodge keys’ to adjust heading port or starboard in one- or ten-degree increments. With an optically bonded 4.1-inch display and its intuitive controls, the AP48 also provide full access to advanced Continuum steering features including automated turn patterns, No Drift steering, depth contour tracking, and more.
Key Features
- Intuitive autopilot interface with extended keypad
- Large, heavy-duty rotary control dial for precision steering
- Continuum steering technology
- Optically bonded 4.1-inch colour display
- Ultra wide 170-degree viewing angle
- Dedicated one-degree and ten-degree port/starboard dodge keys
- Automated turn patterns for fuel-efficient, hands-free manoeuvres
- No Drift steering holds your course against wind and tide
- Depth contour tracking makes it easy to fish ledges and drop-offs
- Easy setup with auto tuning and calibration
- Low-profile glass helm design
- Certified NMEA 2000® connectivity
The AP44 Autopilot Controller combines Simrad Continuum steering technology with a full colour display, intuitive rotary dial and button controls, and modern glass helm styling.Free your hands from the wheel, cruise in comfort, and discover new ways to search for fish; this dedicated controller offers easy access to automated turn patterns, No Drift steering, depth contour tracking, and other advanced pilot features. Connect your chartplotter to add waypoint and route navigation, and enjoy full autopilot control from compatible Simrad displays.
Key Features
- Rotary-dial course adjustment with new intuitive autopilot control
- Optically bonded 4.1-inch color display
- Easy setup with auto tuning and calibration
- Simrad Continuum steering technology
- All new intuitive autopilot control
- Automated turn patterns
- No Drift steering
- Depth contour tracking
- Low-profile ‘Glass Helm’ design
- Low power consumption
- Certified NMEA 2000® connectivity
FU80 Follow UP remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws, loose steering lever. Take command and Mode buttons. Provides course change in Auto mode.
NF80 Non Follow Up remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws. Take command and Mode buttons. Provides course change in Auto mode.
PUMP-1 Hydraulic Pump – 0.8L reversible hydraulic pump, compatible with SeaStar manual helm pumps up to 14ci
QS80 Quickstick remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws. Take command and Mode buttons. Provides course change in Auto mode.
SG05 for Optimus 360 steering systems
The Simrad SG-05 CAN-bus Autopilot connects directly to Optimus and Optimus 360 steering systems giving you a fully integrated steering, navigation and autopilot system.
The Optimus steering system is different: Instead of using a manual helm pump, an electronic helm sensor sends signals along a CAN-bus network to the Pump Control Module which powers the hydraulic pump.
WR10 bezvadu tālvadības autopilota kontrolieris.
WR10 BT-1 Bāzes stacija. No Mico-C kabelis komplektā
Piekaramā pilota kabeļa stūres PAKA: Ietver Point-1 virziena un GPS Sensoru, NAC-1 Autopilota datoru, HELM-1 kabeļa stūres piedziņas iekārtu, gaidīšanas - auto pogu un Micro-C tīkla komponentes.
Key Features
- All new HDS Autopilot User interface - available for Gen2 and Gen2 Touch
- Easy to Install, available for both Hydraulic and Cable steer systems
- Dash-mount button for one-touch Auto/Standby activation
- Steer to Heading, Course or Route
- Automatic Turn Patters
- NAC-1 Plug & Socket connectors – no screw terminals or wire stripping necessary
- High efficiency, super-quiet 0.8L hydraulic gear pump
- Add a second Helm station to a boat using the HDS Power steer commands – no need for additional hydraulics + steering wheel.
