AIS / VHF / FM Antenna Splitter (SP160)
SKU: SP160
Brand: Vesper
Qty: In Stock
Many AIS splitters introduce significant signal loss, some say no loss but this unique Vesper Marine splitter is the only one that provides signal gain - improving AIS reception and increasing range. This is because the Vesper Marine splitter has a built-in low noise amplifier. This is especially important to increase the receive range from the increasing number of low power AIS SART and MOB devices. In addition to the amplification provided by this splitter, when used with your existing antenna you can optimize the range of your AIS transponder because the antenna is also mounted as high as possible. Designed to work with all Vesper Marine AIS transponders including the popular WatchMate XB-6000 and WatchMate XB-8000. In addition it has a unique on-screen VHF-in-use indicator when used with the WatchMate 850 and WatchMate Vision AIS transponders. Increases the performance of other manufacturer´s AIS receivers and transponders too! To simplify installation you can share an existing VHF antenna by using this splitter. The unit removes the need for a separate VHF antenna for an AIS receiver or transponder and allows a single antenna to be shared with a VHF radio. This is an excellent solution when it is difficult to install an additional antenna or you wish to share an existing VHF antenna and maximize your AIS range. This Vesper Marine splitter is specifically designed for use with both AIS receivers and transponders. Our splitter includes two 2m (6.5ft) long patch cables to go between the splitter, AIS and your VHF radio. This provides everything needed for most installations. However, if you require a longer cable be sure to choose high quality marine grade 50 ohm cable with standard PL259 plugs to go between the splitter and your AIS transponder or VHF. Maximum Current: 270 mA; Maximum VHF power: 25W; Maximum AIS power: 12.5W; Compatibility: Fully compatible with all Vesper Marine AIS transponders and receivers. Also compatible with other manufacturer´s AIS receiv
299,00 €
Qty.: - +
   - or -   
Power 10-32 VDC, <0.8W nominal
Similar products
MI10 Dashmount Micro SD card reader: The MI10 Chart Card Reader provides dual microSD card slots for use with NSO and Zeus MFD / MPU systems. Connects with standard USB type A.
SKU: 000-13892-001 ,   Qty: Out of Stock
275,94 €
SKU: 000-14055-001 ,   Qty: Out of Stock
26,40 €
The V3100 Class B AIS is designed to meet the needs of smaller professional vessels and workboats operating in high-traffic areas. SOTDMA technology and increased transmission power (5W vs 2W for regular Class B) with enhanced transmission frequency, reliability, and range compared to standard Class B AIS increases your visibility at sea and in the harbor, where you are at the highest risk of a collision.
SKU: 000-14380-001 ,   Qty: Out of Stock
1122,00 €
SKU: 000-14968-001 ,   Qty: Out of Stock
110,88 €
Full Class B SOTDMA with smartAIS send and receive and integrated no-loss splitter. Monitor and control onboard systems and keep alerted on board or ashore from your smartphone. Operating Temperature: -25°C to +55°C (-13°F to 131°F); Supported Protocols: AIS Class B SO-TDMA, VHF Voice, Class D DSC, ATIS (user configurable, EU region), NOAA Weather (US region); Transmitter Frequency Error: Less than 300Hz; Antenna Connector: SO239; Splitter: Max input power 25W, Insertion Loss RX 0dB, TX < 1dB; Splitter Connector: BNC (2W).
SKU: 113131 ,   Qty: Out of Stock
1654,80 €