AIS DEVICES

NAIS-500 Class B AIS including NSPL500 VHF/AIS Antenna splitter and GPS500 antenna, 1.8 m (6ft) Micro-C cable and T connector. Broadcast your location to anyone nearby with an AIS Receiver. A low cost safety system for recreational vessels and smaller professional vessels in near coastal waters. Reports your position and vessel size and heading to nearby vessels, avoiding dangerous situations.

NAIS-500 class B AIS with GPS-500 GPS antenna. Broadcast your location to anyone nearby with an AIS Receiver. A low cost safety system for recreational vessels and smaller professional vessels in near coastal waters. Reports your position and vessel size and heading to nearby vessels, avoiding dangerous situations.

GPS-500: GPS antenna for NAIS-500 AIS transceiver. 10 m (33 ft) cable with SMA connector

V5035 Class A AIS System - IMO Compliant AIS system for SOLAS vessels. NMEA2000 Connection for integration with P3007 GPS Systems and with Simrad MFD systems. For an auxillary larger AIS display, use P3007 NAV Display.

Many AIS splitters introduce significant signal loss, some say no loss but this unique Vesper Marine splitter is the only one that provides signal gain - improving AIS reception and increasing range. This is because the Vesper Marine splitter has a built-in low noise amplifier. This is especially important to increase the receive range from the increasing number of low power AIS SART and MOB devices. In addition to the amplification provided by this splitter, when used with your existing antenna you can optimize the range of your AIS transponder because the antenna is also mounted as high as possible. Designed to work with all Vesper Marine AIS transponders including the popular WatchMate XB-6000 and WatchMate XB-8000. In addition it has a unique on-screen VHF-in-use indicator when used with the WatchMate 850 and WatchMate Vision AIS transponders. Increases the performance of other manufacturer´s AIS receivers and transponders too! To simplify installation you can share an existing VHF antenna by using this splitter. The unit removes the need for a separate VHF antenna for an AIS receiver or transponder and allows a single antenna to be shared with a VHF radio. This is an excellent solution when it is difficult to install an additional antenna or you wish to share an existing VHF antenna and maximize your AIS range. This Vesper Marine splitter is specifically designed for use with both AIS receivers and transponders. Our splitter includes two 2m (6.5ft) long patch cables to go between the splitter, AIS and your VHF radio. This provides everything needed for most installations. However, if you require a longer cable be sure to choose high quality marine grade 50 ohm cable with standard PL259 plugs to go between the splitter and your AIS transponder or VHF. Maximum Current: 270 mA; Maximum VHF power: 25W; Maximum AIS power: 12.5W; Compatibility: Fully compatible with all Vesper Marine AIS transponders and receivers. Also compatible with other manufacturer´s AIS receiv

This antenna is specially designed by Vesper Marine to be used with our Antenna Splitter. Up until now you´ve had to choose an AIS-tuned antenna that is optimized for the AIS frequencies but has lower performance for your VHF radio. Or you could choose an antenna that is designed for VHF radio communications but isn´t optimal for AIS. Either of those works but we´ve got a better solution. We´ve created an antenna that solves this dilemma. It has two key features that combine to make it ideal for use with our antenna splitter: Wide bandwidth of 6 MHz means it will cover 3 MHz above and below the center point; 159 MHz center frequency gives excellent performance for VHF radio (156 Mhz) and AIS (162 MHz). The result is an antenna with superior performance over other designs. It has less than 1.5:1 VSWR at 156 MHz all the way up to 162 MHz. With other VHF or AIS antennas you´ll only get low VSWR at one end of the frequency band but not both. We´ve put all of this into the same physical package as our most popular antenna. It´s perfect for installations where the lowest possible windage is a requirement. A detachable cable makes installation and maintenance easier and allows for any length cable to be used. It easily mounts on a mast but is also suitаble for mounting most anywhere with it´s included L-bracket. Example mounting locations from our customers are along side solar panels, bimini sides, on an arch, above a radar, or along the edge of a cabin top. The L-bracket can be removed allowing for even greater mounting flexibility. Specially designed 1.0m stainless steel antenna; Easily replaceable stainless steel whip if it gets lost or damaged; Optimized for sharing between VHF radio and AIS transponder; Includes SO239 socket & mounting bracket; Perfect for masthead or installations where the L-bracket suits; Easily adapted to most any installation configuration; Detachable cable allows for any length to be used.

This antenna is designed for the WatchMate Vision AIS Transponder. It may also be used as a replacement antenna for an XB-8000 or XB-6000 AIS Transponder. It combines a high performance GPS antenna and a low noise amplifier into a state-of-the-art compact and fully waterproof enclosure. This innovative antenna design has two mounting options; Pole Mount or Base Mount. As well as being easy to mount it comes with a 10m (32.8 feet) cable that has a small diameter connector making it easier to route the cable through smaller holes. Fully weather proof; Ultra-high sensitivity; Compact construction; Excellent temperature stability; Small connector at one end of the cable to facilitate installation; Two mounting configurations (pole or base); Compatibility: For use only with a WatchMate Vision or as a replacement antenna for an XB-8000 or XB-6000; Construction: Compact waterproof (IPx7) housing; Dimensions: 90mm (3 1/2") diameter x 118mm (4 2/3") high when used with base mount (as shown in the photo at the top of this page); Mounting: Pole (standard 1" threaded mast) and Base included; Cable: 10 metre (32.8 ft) RG58 with SMA that connects directly to WatchMate Vision.

Powered by smartAIS technology, Vision2 has safety features that can save lives. Get proactive alerts when you have potential collision situations, if your anchor drags or if there´s a man overboard situation. With its intuitive and easy to use touchscreen, scroll through the menu, zoom in and out, see vessel details and navigation data, change alarm settings and more with the most gentle of touches. Remote control your transponder from anywhere on board with your smartphone, tаblet or smartwatch using highispeed WiFi. The Vision2 enables up to eight devices connected simultaneously for greater flexibility. The Vision2 has a stylish black bezel front panel with glossy black side panels, designed to complement every helm or Nav station. Operating Temperature: -25°C to +55°C (-13°F to 131°F); Coastal outlines: World-wide included; Nr of receivers: 2 AIS, 1 DSC (timeshared); Receive sensitivity: -113 dBm (<20% PER); Number of transmitters: 1 AIS; Transmit power output: 33 dBm (2W); GPS: 50 channel with internal antenna. Supports WAAS and EGNOS. Optional external antenna is required if Vision2 is mounted without a clear view of the sky; GPS navigation rate: 50 channel with internal antenna. Supports WAAS and EGNOS. Optional external antenna is required if Vision2 is mounted without a clear view of the sky; GPS sensitivity: tracking & navigation, -142dBm acquisition (cold start); GPS accuracy: Position 2.5m CEP, SBAS 2.0m CEP; VHF antenna required: 50 ohm, 156-162MHz, max 2:1 VSWR, PL-259 connector; Serial data: 1 fully isolated USB port (mini), 1 isolated NMEA 0183 input (RS422 4800/38400 baud) 1 NMEA 0183 output (RS422 4800/38400 baud); Connectivity: NMEA 2000, NMEA 0183, USB, Wireless 802.11 b/g/n, All input NMEA 0183 sentences are repeated to the NMEA 0183 output, USB and WiFi. Ѕelected NMEA 2000 PGN´s (heading, wind, depth, speed, temperature, and log) are translated to NMEA 0183 sentences and repeated to the NMEA 0183 output, USB and WiFi. This allows a wide varie

This package is designed for installing a WatchMate XB-6000 AIS Transponder in a nav station or wheelhouse and allows you to share a single VHF antenna between your AIS transponder and VHF radio. This package is designed to replace your existing VHF antenna with our optimized AIS/VHF shared antenna but keep your existing antenna cable.

WatchMate XB-6000 is a Class B AIS transponder with a two channel parallel receiver and transmitter. It transmits your vessel position and details and receives the same kind of information from other vessels with AIS transponders. The AIS data is sent every few seconds and includes information such as course, speed, latitude, longitude, and heading. Static information about the vessel is sent every few minutes and includes the name, type of vessel, length, beam, draft, etc. Size: 200mm wide x 130mm high x 60mm depth (7 7/8" x 5 1/8" x 2 3/8"); Operating temperature: -25°C to +55°C (-13°F to 131°F); Number of receivers: 2 AIS, 1 DSC (timeshared); Receive sensitivity: -113 dBm (<20% PER); Number of transmitters: 1 AIS; Transmit power output: 33 dBm (2W); GPS: 50 channel with internal antenna. Supports WAAS and EGNOS. Also includes external antenna; GPS navigation rate: Ѕelectable 1Hz or 5Hz with magnetic variation included in output; GPS sensitivity: -159dBm tracking & navigation, -142dBm acquisition (cold start); GPS accuracy: Position 2.5m CEP, SBAS 2.0m CEP; VHF antenna required: 50 ohm, max 2:1 VSWR @ 162MHz, PL259 connector.

This package is designed for installing an XB-8000 AIS Transponder in a nav station or wheelhouse and allows you to share a single VHF antenna between your AIS transponder and VHF radio. This package is designed to replace your existing VHF antenna with our optimized AIS/VHF shared antenna but keep your existing antenna cable.

This package is designed for installing an XB-8000 AIS Transponder in a nav station or wheelhouse and allows you to share a single VHF antenna between your AIS transponder and VHF radio. This package is designed to replace your existing VHF antenna with our optimized AIS/VHF shared antenna but keep your existing antenna cable.

WatchMate XB-8000 is the world´s only black box transponder with built-in smartAIS alarms. Get alerted with the external audible alarm included with the XB-8000 that sounds if it detects a risk in case of potential collisions, dragging anchor or man overboard situations. The alarm sounds even if your MFD or mobile device is switched off. Operating temperature: -25°C to +55°C (-13°F to 131°F); Number of receivers: 2 AIS, 1 DSC (timeshared); Receive sensitivity: -113 dBm (<20% PER); Number of transmitters: 1AIS; Transmit power output: 33 dBm (2W); GPS: 50 channel (external antenna included) with WAAS and EGNOS; GPS navigation rate: Selectаble 1Hz or 5Hz with magnetic variation included in output; GPS sensitivity: -159dBm tracking & navigation, -142dBm acquisition (cold start); GPS accuracy: Position 2.5m CEP, SBAS 2.0m CEP; VHF antenna required: 50 ohm, max 2:1 VSWR @ 162MHz, PL259 connector; Serial data: Serial data: 1 fully isolated USB port (mini), 1 isolated NMEA 0183 input (RS422 4800/38400 baud) 1 NMEA 0183 output (RS422 4800/38400 baud); Connectivity: NMEA 2000, NMEA 0183, USB, Wireless 802.11 b/g. All input NMEA 0183 sentences are repeated to the NMEA 0183 output, USB and WiFi. Selected NMEA 2000 PGN´s (heading, wind, depth, speed, temperature, and log) are translated to NMEA 0183 sentences and repeated to the NMEA 0183 output, USB and WiFi. This allows a wide variety of NMEA 0183 and NMEA 2000 instruments to be interfaced and output to all other connected devices; NMEA 2000: NMEA 2000 certified. LEN 2. Micro-C male connector. Female drop cable required (not included). Compatible with all NMEA 2000 certified Raymarine SeaTalk NG devices (DeviceNet cable required), Garmin, Furuno, SimNet (NMEA 2000 adapter cable required, Navico part 24006199 or 24006413), and other NMEA 2000 certified products; Wireless: Access Point for up to 5 devices or client of existing router; Wireless security: WPA / WPA2 Personal (PSK).