AUTOPILOOT

TP sari pakub usaldusväärset juhtimist roolipinniga paatidele pikkusega kuni 32 jalga. Madal energiakasutus ja täpne juhtimisvõimekus koos minimaalse müraga, aitavad sul nautida purjetamist veelgi rohkem.

The TP32 is a reliable and robust autopilot, which has been optimised to draw as little power as possible and operate extremely quietly, making it ideal for sailboats up to 37ft.

Outboard Pilot Cable steer Pack: Includes Point-1 Heading and GPS Sensor, NAC-1 Autopilot Computer, HELM-1 cable-steer helm drive unit , Standby-Auto button and Micro-C network components.

NAC-2 Autopilot Core Pack: Comprising of the low-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit.

NAC-2 VRF Core Pack: Comprising of the low-current NAC-2 autopilot computer and Precision-9 compass.

NAC-3 Autopilot Core Pack: Comprising of the high-current NAC-3 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit.

NAC-3 VRF Core Pack: Comprising of the high-current NAC-3 autopilot computer and Precision-9 compass.

AP44 VRF high capacity pack. Comprising of AP44 controller, Precision-9 compass,PUMP-3 hydraulic pump and NAC-3 autopilot computer

The Precision-9 Compass. Outputs Heading (20Hz), Rate Of Turn (20 Hz), roll, and pitch (10 hZ) over the NMEA 2000® network.

HS60 GPS Compass - Provides heading (2° RMS accuracy), pitch, roll, heave and position to the vessel, ideal for recreational boats and smaller professional vessels requiring accurate heading in a small formfactor. Reccomended for Simrad Autopilots.

AP44 Autopilot controller: Rotary dial course adjuster, optically bonded 4.1-inch color display

The AP48 Autopilot Controller is a premium dedicated control head for Continuum autopilot systems, enhanced with modern glass helm styling.

DD15 Direct Drive unit for sailboats 30’-40’ with electromagnetic clutch, lever with tiller pin and RF300 Rudder feedback. 12 V power supply (NAC-3 / H5000 required)

DrivePilot Hydraulic Pack: Includes Precision-9 Heading Sensor, NAC-1 Autopilot Computer, PUMP-1 Hydraulic Pump – 0.8L reversible hydraulic pump, Standby-Auto button and Micro-C network components.

FU80 Follow UP remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws, loose steering lever. Take command and Mode buttons. Provides course change in Auto mode.

H5000,Pilot Computer: The record-breaking B&G Pilot features dedicated steering modes and sailing algorithms including Gust Response, Recovery and High Wind Response. It’s been proven in the toughest conditions and most testing environments and is ideal for short-handed cruisers or racers. Note: An H5000 Hydra, Hercules or Performance CPU is required to steer to wind

Helm Drive - Straight shaft Type S. The drive is a rotary mechanical autopilot drive system which makes it simple and economical to fit an autopilot on smaller powerboats with mechanical push-pull cable steering. (Steering Wheel not included)

Hydraulic Ram T0 12V - The RAM T0 Hydraulic linear actuator combines a cylinder, pump, motor, clutch and reservoir in a pre-filled, sealed unit. Designed to be used on vessels fitted with mechanical primary steering that can be back driven.

Hydraulic Ram T1 12V High power, efficient drive units for maximum power with minimum consumption. Ram drives allow the Power Steer mode on the Pilot to be used in cases of manual steering failure. Fully Integrated hydraulic system, no external hoses, reservoirs etc.

Hydraulic Ram T2 12V High power, efficient drive units for maximum power with minimum consumption. Ram drives allow the Power Steer mode on the Pilot to be used in cases of manual steering failure. Fully Integrated hydraulic system, no external hoses, reservoirs etc.

Hydraulic Ram T2 24V High power, efficient drive units for maximum power with minimum consumption. Ram drives allow the Power Steer mode on the Pilot to be used in cases of manual steering failure. Fully Integrated hydraulic system, no external hoses, reservoirs etc.

Hydraulic Ram T3 24V Hydraulic Steering Systems combine a hydraulic cylinder with clutch, reversing pump and reservoir in a compact installation.

JS10 Non Follow Up Joystick, designed for armrest mounting or at key positions on the vessel. Quickly switches between Auto/NFU modes. Compatible with AC70, AC80A, AC80S, AC85, NAC-3. Comes with 10m cable.

NAC-1 Autopilot Computer – The brains behind the Outboard Pilot and Drive Pilot systems. It contains the steering computer and electronics for the drive unit motor and clutch.

The low-current NAC-2 autopilot computer is ideal for smaller vessels, designed to run small hydraulic drives and mechanical drives for vessels up to 10 metres (33 feet) in length. Also provides solenoid output.

The high-current NAC-3 autopilot computer is designed for vessels over 10 metres (33 feet) in length, with the ability to run heavy-duty hydraulic drive pumps & linear rams, and also provides solenoid output.

NF80 Non Follow Up remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws. Take command and Mode buttons. Provides course change in Auto mode.

OP12 Autopilot Controller.

Outboard Pilot Hydraulic Pack: Includes Point-1 AP Heading and GPS Sensor, NAC-1 Autopilot Computer, PUMP-1 – 0.8L reversible hydraulic pump, hydraulic fitting kit, Standby-Auto button and Micro-C network components.

PUMP-1 Hydraulic Pump – 0.8L reversible hydraulic pump, compatible with SeaStar manual helm pumps up to 14ci

PUMP-2: 12V DC: Reversible hydraulic gear pump. 0.8L (49 cu.in) / min. For cylinder displacement of 80 cc - 250 cc (4.9 - 15.2 cu.in) (NAC-2 / AC12 required).

PUMP-3: 12V DC: Reversible hydraulic gear pump. 1.6L (98 cu.in) / min. For cylinder displacement of 160-550 cc (9.8 - 33.5 cu.in) (NAC-3 / AC42 required).

PUMP-4: 12V DC: Reversible hydraulic gear pump. 3.0L (183 cui) / min. For cylinder displacement of 290 - 960 cc (17.7 - 58.5 cu. in.) (NAC-3 / AC42 required)

PUMP-5: 24V DC: Reversible hydraulic gear pump. 3.0L (183 cui) / min. For cylinder displacement of 290 - 960 cc (17.7 - 58.5 cu. in.) (NAC-3 / AC42 required)

QS80 Quickstick remote unit with display, 6m factory mounted drop cable, T-connector, front bezel, installation and user manual, gasket for panel mounting, mounting screws. Take command and Mode buttons. Provides course change in Auto mode.

SD10 Mechanical Drive unit for NAC-2 Autopilot computers. The Dive will suit sailboats 25’-37’ with 6’ steering cable with electromagnetic clutch with override function, built in Rudder feedback and 12 V power supply

Steer-by-wire Volvo EVC Kit for IPS (includes NAC-D, Precision 9, Volvo Gateway)

Steer-by-wire Autopilot Pack for Yamaha Helm Master (includes NAC-D, Yamaha gateway and Precision 9 heading sensor).

The TP22 is a reliable and robust autopilot for tiller steered boats up to 34ft in length. Low power draw and precise steering capabilities couple together with minimal noise, allowing you to enjoy some smooth sailing.

Triton Autopiloodi lisasüsteem, madal vool

Triton² Pilot Controller. This intuitive keypad can be combined with a B&G Triton² Display to create a fully-featured autopilot controller.

Bluetooth vastuvõtja mille vahendusel saab juhtida autopilooti. Lihtne paigaldada juba paigaldatud autopiloodisüsteemidele lisaks. Sobib Lowrance (NAC-1), Simrad (AC12, AC42, AC70, AP60/70/80) ja B&G (Triton, H5000) autopilootidega.
Vastuvõtja ühendub NMEA2000 võrku ja puldi tööraadius on 30m.
Lisaks vajalik juhtpult ja N2k kaablid.

Bluetooth juhtpult, mille vahendusel saab juhtida autopilooti. Lihtne paigaldada juba paigaldatud autopiloodisüsteemidele lisaks. Sobib Lowrance (NAC-1), Simrad (AC12, AC42, AC70, AP60/70/80) ja B&G (Triton, H5000) autopilootidega.
Lisaks vajalik BT-1 vastuvõtja ja N2k kaablid.

Bluetooth juhtpult, millega saab juhtida autopilooti. Lihtne paigaldada juba paigaldatud autopiloodisüsteemidele lisaks. Sobib Lowrance (NAC-1), Simrad (AC12, AC42, AC70, AP60/70/80) ja B&G (Triton, H5000) autopilootidega.
Vastuvõtja ühendub NMEA2000 võrku ja puldi tööraadius on 30m

Randmekinnituse rihmaga saab WR10 juhtpuldi mugavalt randmele kinnitada ning kui pulti ei kasutata on ta ikkagi mugavalt käepärast.